Ultraviolet Intensity UVC Radiation Meter UV Lamp Tester
Introduction:
LS125 is a host that can match a variety of different UV probes, it can intelligently identify probe models. We have 9 probes for choose, which covering UVA, UVB, UVC, UVV and other bands. The host with probe can be used for ultraviolet intensity and energy detection, which is widely used in ultraviolet curing, ultraviolet aging, ultraviolet sterilization and other fields.
Advantages:
1. Multi-probe UV light meter. The host and probe are linked by aviation plugs. One host can intelligently match 9 different UV probes to meet different test needs.
2. Digital probe: adopt advanced digital probe technology, the probe is not easy to be interfered and provides excellent measurement accuracy.
3. The instrument can intelligently identify the probe model and the probe will adapt the display interface automatically.
4. A variety of units are available: The instrument can provide different unit selections based on the identified probe model. After connecting the probe, you can choose the appropriate unit in the setting mode.
5. Abundant data statistics function: real-time power value, maximum value, minimum value, average value, measurement time, energy value can be displayed at the same time. (You can also choose not to display the energy value in the setting mode).
6. Data recording: 9 sets of measurement data can be saved. During the measurement, press the "HOLD" to lock the maximum value and the current value during the measurement at the same time. The data will be saved even after the power is turned off. (Except when the battery is removed).
7. Ultra-low power consumption: The instrument is powered by four AAA batteries. The UV measurement device will automatically shut down after 10 minutes without any operation, which can avoid wasting battery power and prolong the service life of the instrument.
Probe Selection Table:
According to the spectral response range, application, measuring range and test aperture size of the light source, we have introduced 9 different types of probes. The selection table is as follows:
1. Probe spectral response range, test aperture and application:
| No. |
Probe Type |
Spectral Response Range |
Test Aperture |
Application |
| 1 |
UVC-X0 |
230-280nm |
φ10mm |
254nm UV sterilization mercury lamp |
| 2 |
UVCWP-X1 |
230-280nm |
φ10mm |
254nm UV sterilization mercury lamp, waterproof |
| 3 |
UVCLED-X0 |
240-320nm |
φ10mm |
260nm-285nm UV LED germicidal lamp |
| 4 |
UVB-X0 |
280-315nm |
φ10mm |
General UVB intensity and energy measurement |
| 5 |
UVA-X0 |
315-400nm |
φ10mm |
High pressure mercury lamp in UV curing industry |
| 6 |
UVA-X1 |
315-400nm |
φ10mm |
General UVA intensity and energy measurement |
| 7 |
UVALED-X0 |
340-420nm |
φ10mm |
Area light source of UV LED in UV curing industry |
| 8 |
UVALED-X1 |
340-420nm |
Φ1mm |
Point light source of UV LED in UV curing industry |
| 9 |
UVALED-X3 |
340-420nm |
φ10mm |
General UVA+UVV LED, low power measuring range |
2. Probe power measuring range, optional units and size:
| No. |
Probe Type |
Power Measuring Range |
Optional Units |
Probe Size |
| 1 |
UVC-X0 |
0 - 200000μW/cm² |
μW/cm², mW/cm², W/m² |
Diameter 39mm* Thickness 15mm |
| 2 |
UVCWP-X1 |
0 - 200000μW/cm² |
μW/cm², mW/cm², W/m² |
Diameter 50mm* Thickness 20mm |
| 3 |
UVCLED-X0 |
0 - 200000μW/cm² |
μW/cm², mW/cm², W/m² |
Diameter 39mm* Thickness 15mm |
| 4 |
UVB-X0 |
0 - 200000μW/cm² |
μW/cm², mW/cm², W/m² |
Diameter 39mm* Thickness 15mm |
| 5 |
UVA-X0 |
0 - 2000mW/cm² |
mW/cm², W/m² |
39mm*32mm*15mm(L*W*H) |
| 6 |
UVA-X1 |
0 - 200000μW/cm² |
μW/cm², mW/cm², W/m² |
39mm*32mm*15mm(L*W*H) |
| 7 |
UVALED-X0 |
0 - 20000mW/cm² |
mW/cm², W/cm², W/m² |
39mm*32mm*15mm(L*W*H) |
| 8 |
UVALED-X1 |
0 - 20000mW/cm² |
mW/cm², W/cm², W/m² |
39mm*32mm*15mm(L*W*H) |
| 9 |
UVALED-X3 |
0 - 200000μW/cm² |
μW/cm², mW/cm², W/m² |
39mm*32mm*15mm(L*W*H) |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}