25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined

• After-sales Service: 24 Hours Online
• Warranty: One Year
• Type: Reaction Kettle
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: KH-100
• Material: Stainless Steel
• Capacity: 100ml
• Structure: Filling Tube
• Pressure: Negative
• Agitator Model: No
• Tower Reactor Type: No
• Heating: Outside Heating Device
• Heat Transfer Structure: Combined
• Automatic Grade: Automatic
• Condition: New
• Name of Commodity: Hydrothermal Synthesis Reactor
• Model: Kh-100
• Volume: 100ml
• Material of Kettle: SS304 Stainless Steel
• Liner: PTFE/Ppl
• Pressure of Kettle: No More Than 3MPa
• Temp. Range: 240/300 Degrees Celsius
• Heating Rate: No More Than 5c/Min
• Cooling Rate: No More Than 5c/Min
• Advancing Working Temp: 220/280 Degrees Celsius
• Customization: Customized Is Accept
• Corrosion Resistant: Yes
• Net Weight: 2.7kg
• Gross Weight: 3kg
• Packing Dimension: 200X200X100
• Transport Package: Carton Box or Plywood Box
• Specification: 200x200x100
• Trademark: WollenLab
• Origin: China
• HS Code: 8419899090
• Production Capacity: 1000sets/Month
• Package Size: 13.00cm * 8.50cm * 8.50cm
• Package Gross Weight: 3.000kg
• Lead Time: 3 days (1 - 1 Set) ; To be negotiated ( > 1 Set)

Product Description

25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined
 

Introduction:

hydrothermal synthesis reactor is the reactor that provides synthetic chemical substances in certain temperature and pressure conditions.


Features:
 

1. It is made of quality non-magnetic0Cr18Ni9Ti of stainless steel.
2. The kettle body and kettle cover are sealed by durable and reliable line seal structure with long-term stability to leak free seal.
3. Stainless steel chassis, stainless steel kettle body, stainless steel gland, stainless steel kettle cover and extended stainless steel rods.
4. With PTFE liner, double care, acid and alkali, resistant to high temperature of 200ºC
5. Thickening processing PTFE cover, not easy to soften.
6. Beautiful appearance, reasonable structure and easy to operate.
7. Good corrosion resistance.

Model	KH-25	KH-50	KH-100	KH-150	KH-200	KH-250	KH-300	KH-500	KH-1000
Volume	25ml	50ml	100ml	150ml	200ml	250ml	300ml	500ml	1000ml
Material	SS304 Stainless Steel Kettle; PTFE/PPL Liner
Pressure	≤3Mpa
Temp. Range	PTFE≤240ºC PPL≤300ºC (Highest Temperature)
Heating or Cooling Rate	≤5ºC/Min
Remarks	Advancing working temp: 220ºC(PTFE), 280ºC (PPL); The highest pressure is 3Mpa.

Operation Steps:

1.Pour the reaction solvent into the PTFE/PPL liner and ensure the freaction solvent is less than 80% of volume.
2. Make sure that the bottom gasket of reactor is in the correct position (protrusion facing down), then place the PTEF/PPL liner and upper gasket, and tighten the kettle lid with a screw.
3. The hydrothermal synthesis reactor is placed in a heater and heated to a desired temperature (less than the specified safe use temperature) according to the specified temperature increase rate.
4. The kettle lid could be opened when you confirm that the temperature in the kettle is lower than the boiling point of the reaction solvent. When the temperature is to be cooled at the end of the reaction, it must be operated strictly in accordance with the specified cooling rate to facilitate safety and the service life of the reactor.
5. After confirming that the temperature in the reactor is lower than the boiling point of the reaction solvent, please loosen the kettle lid with a screw, and then open the kettle lid.
6. The hydrothermal synthesis reactor should be cleaned in time after use to avoid rust. The Sealing part of kettle and kettle lid should be carefully cleaned and protected from damage.

Our Services: