1. Stretched shell and cover prevent leaking.
2. Heating and stirring can proceed simultaneously.
Ceramic Magnetic Stirring Hot Plate with the following functions:
SH-4C
1. Setting temperature precisely, stepless adjustable stirring speed .
2. Large LCD display, temperature and rotate speed can be displayed simultaneously.
3. Double sensors: outer PT100 temperature sensor to control liquid temperature precisely, inner K model sensor to control hot plate temperature.
SH-II-4C
1. Setting temperature and stirring speed precisely,. With speed switch to start or stop stirring at any time.
2. With timing function (0~9999mins), the time can be set according to customer's requirements, with sound and light alarm function.
3. Double sensors: outer PT100 temperature sensor to control liquid temperature precisely, inner K model sensor to control hot plate temperature.
4. One key to shift inside and outside sensor easily and precisely.
5. Large screen LCD display can indicate temperature, rotational speed and timing at the same time.
Technical Parameters:
| Model |
SH-4A |
SH-4B |
SH-4 |
SH-4C |
SH-II-4C |
| Mode |
Heating |
Stirring |
Heating+ Stirring |
Digital+Heating+Stirring |
Function |
Max. Volume |
5000ml |
| Stirring Speed |
No |
200~2000rpm |
| Working Time |
Continuous |
| Mini Stirring Speed |
No |
200rpm |
| Max Temp. |
380ºC |
No |
380ºC |
Structure |
Exterior |
Iron plate welding, surface spraying |
| Heating Plate |
Ceramic Coated |
| Driving Mode |
No |
Motor |
| Motor Power |
No |
20W |
| Heating Power |
600W |
No |
600W |
| Stirrer |
No |
PTFE |
| Controller |
Continuous
Operation |
Yes |
| Setting Mode |
Scale |
Digital |
Speed Display
Mode |
Scale |
Digital |
Digital |
| Timer |
No |
Yes |
| Operation Function |
No |
Yes |
| Sensor |
No |
PT100 |
PT100 |
| Specification |
Exterior Size |
320x190x125mm |
| Packing Size |
390x240x230mm |
| Plate Size |
190x190mm |
| Plate Load |
10kg |
| Power Supply |
110V or 220V 50/60Hz |
| NW/GW |
5/6kg |
Precautions:
1. Do not use dry boil.
2. Please do not connect the ground wire to ensure safe use.
3. In order to extend the using of the product, all magnetic stirring motors are equipped with fan of heat dissipation function, so when you doing heating experiments, especially high temperature heating tests, the instrument cannot be used for heating alone. Be sure to adjust the motor to rotating or middle Speed rotation state (or idling) to prevent the motor and electrical appliances from being damaged by high temperature radiation. If the motor cannot start to rotate, contact for maintenance in time.
4. When the high-temperature heating is finished, please turn off the heating first, wait a few minutes for the residual temperature to dissipate, and then turn off the stirring.
5. The heating part has a high temperature, so be careful when working to avoid burns.
6. If there are wet hands, liquid spills, or long-term exposure to excessive humidity, the leakage phenomenon should be dried in time or dried naturally before use to avoid danger.
7. When it don't use for a long time, please store it in a dry place without corrosive gas.
8. When the ambient humidity is relatively high, induction electricity may be transmitted to the shell through the insulation layer. Please connect the ground wire to avoid leakage and pay attention to ventilation.
9. Relative humidity: 35%-85% (no condensation).
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}